| AEB-MG Enhanced Modstock EMOD Basic Kit Commercial Foliage Green
Vltor
The Vltor EMOD is based on the same rugged and practical design as the original Vltor Modstock - with specific features designed from lessons taken from the modern battlefield.
The Vltor EMOD is about one inch longer than the original Modstock and with the rubber butt plate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the Vltor EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull.
The buttplate of the Vltor EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch, making transitions from the ready feel much more natural. The EMOD was given enough weight to help balance out the normally muzzle heavy feel associated with negative pitch buttstocks.
The toe of the buttplate is rolled under; giving the Vltor EMOD a superior feel when the weapon is held in the "out of pocket" heads up hold. The buttplate is covered with a removable rubber buttpad that is molded over a metal strike plate. The shape of the buttplate and the rubber buttpad give a solid stock purchase in all situations.
The Vltor EMOD features more storage in the removable, waterproof side compartments; the EMOD holds up to four CR123 or three AA batteries. There is also an additional weather proof compartment in the clubfoot area of the stock, this compartment can be accessed quickly and holds two AA batteries or other small parts.
Constructed from the finest materials, the Vltor EMOD will stand up to the most rugged demands. The Vltor EMOD is available for either the standard "MilSpec" receiver extension tube, or for the aftermarket "Commercial" size tube. Available colors include Black, Foliage Green and Flat Dark Earth (tan). The Vltor EMOD is only available in the Clubfoot model
| EMOD At A Glance |
Details |
| Design |
Clubfoot with Butterfly Latch |
| Construction |
Impact and temperature resistant polymer, specially blended for Vltor. Metal components are either carbon steel or stainless steel (depending on the application) |
| Compatibility |
Milspec EMods will only fit receiver extensions/buffer tubes with the outer diameter of 1.150”, while Commercial EMods will only fit 1.170” diameter receiver extensions. |
| Weight - Nominal |
Less than 14 oz. (Milspec and Commercial with storage compartment and buttpad installed) |
| Dimensions |
Length: w/ buttpad 7.75 (at Centerline of tube)
LOP: 11.5 inches Collapsed
LOP: 14.75 inches fully Extended |
| Color Finish |
All stocks have a matte (anti-reflection/glare) finish. IMods are only available in the following colors: Black, Flat Dark Earth (Tan) and Foliage Green. Foliage Green is more of a “grey” green versus Olive Drab. |
| Special Features |
Total of 8ea CR123, or 6ea AA batteries in storage tubes. Additional storage for 2ea AA batteries or small parts in quick access compartment
Standard Sling attachments for military and quick disconnect swivel socket ambi. | |
