Militec-1 Grease .05 oz (3-Pack)
BENEFITS OF MILITEC-1 GREASE
Reduced maintenance, extended lubricating intervals, increased equipment life
Reduction in operating temperatures - typically 10°F to 25°F
Extended bearing life - as much as 35% to 50%
Reduces corrosion, wear and galling
Stays in place and lubricates in the most severe conditions
Extremely wide variety of applications
Compatible with other lithium complex greases
Versatile temperature ranges
Bearings remain lubricated even after the grease is used
Prevents rust and oxidation
Excellent water washout resistance
Superior shock-load protection
All Automotive and Fleet applications, including all Universal and CV joints, Chassis, Wheel Bearing, High-Temp Disc Brake, Steering Gear, Water Pump, Fifth wheel, etc.
All "Off-Road" equipment used in Agriculture, Construction, Logging, and Mining where maximum protection against extreme shock loading and/or severe water washout is required.
All Industrial applications, including conveyor belts, rock crushers, lumber mills, sand and gravel screens, oil field and offshore drilling equipment, marine deck equipment, etc.
FORMULATION OF MILITEC-1 GREASE
MILITEC-1 GREASE is made from very finest ingredients available. We use only premier-quality polymers, the best high-viscosity base oils, advanced anti-wear agents, natural rust inhibitors and superior lithium-complex soap thickeners.
If we used nothing more than these fine ingredients, our grease would be equal or superior to any grease in the world. However, the final manufacturing step sets MILITEC-1 GREASE apart. We finish our blending by adding 15% MILITEC-1 Metal Conditioner by weight. MILITEC-1 Metal Conditioner is unique in its ability to form a physical and chemical bond within all metal surfaces.
The result, MILITEC-1 GREASE, is unsurpassed in improving mechanical efficiency, reducing downtime, and preventing catastrophic failure.
Extended Grease Intervals
With MILITEC-1 GREASE, the frequency of re-greasing can be reduced in most applications. Since the MILITEC-1 Metal Conditioner contained in MILITEC-1 GREASE provides most of the lubrication, the grease itself does less actual work. The great reduction in internal friction, heat and wear means the grease maintains its original chemical and physical properties longer. Since the grease does not degrade as rapidly, it does not need to be replaced as frequently.
The result? MILITEC-1 GREASE lasts longer than other greases, extending routine maintenance intervals.
The benefits of MILITEC-1’s long-term lubrication potential are obvious in regular maintenance cycles. Our customers tell us they save not only in terms of time and labor, but they also cut expenditures on unscheduled down time.
MILITEC-1 GREASE is extremely versatile. It can be used in an unusually broad range of applications. MILITEC-1 GREASE excels whether it is used in low-load, low-temperature operations such as vehicle U-joints; or the high loads and high temperatures typically found in large industrial gear and bearing systems.
MILITEC-1 GREASE is uniquely effective. MILITEC-1 GREASE provides lubrication in extreme out-of-parameter circumstances that would cause other greases to fail. As the MILITEC-1 Metal Conditioner in the base grease migrates into the metal surface, it reacts chemically within the metal and becomes part of the metal. The result is constant molecularly-bonded lubrication throughout the entire greased mechanical component - even if the grease is lost.
MILITEC-1 GREASE improves efficiency, extends equipment life, reduces downtime and helps protect against unscheduled maintenance. MILITEC-1 GREASE will improve your "bottom line" by reducing energy usage, reducing maintenance costs, and reducing capital equipment replacement.