COBRA TACTICAL RIFLES
Free Float Rails
AR15 - M16 Parts
Flashlights & Batteries
Optics / Binoculars
Buffer Tubes/ Buffers
> Cobra Tactical Heavy Carbine Buffer for AR-15, M16 103002
Cobra Tactical Heavy Buffer Carbine for AR-15 M4 1001019
Cobra Tactical Heavy Carbine Buffer for AR-15, M16 103002
Questions about this item? Be the first to ask here.
select name from list
other, add new name below
or add name:
*We'll ask for shipping info at checkout
Add to Cart
Write a Review
Add to Wish List
Add to Gift Registry
Cobra Tactical AR-15 Carbine Buffer, Heavy, for AR-15, M16 1001019
Our Cobra-15 Carbine H-Buffer is 3-1/2" in length.
This is the Heavy Buffer, not the H2 (Extra Heavy buffer). There are three basic weights. Other manufacturers such as Vltor also have other buffer weights.
Carbine buffers should be used in carbine length buffer tubes (Lower Receiver Extension Tubes). The weight you will use will be partially dependent upon the barrel length, carrier weight, ammo type and barrel gas port diameter. If you are unsure of which one you need, the following may be of some help. In generally we find that barrels of 16 inches and longer work well with the standard weight carbine buffer. We also find that 14.5 barrels work best with the H2 buffers. Sometimes its a matter of trial and error. If your brass is kicked out between 1 and three o'clock you are probably running the correct buffer. If it is flying off past 3 o'clock you are likely over gassed. Using a heavier buffer will likely correct the issue. More importantly over gassed AR-15's can result in miss-feeds. This discussion is not intended to cover all factors relating to your AR-15. We do recommend that you consult with your local qualified gunsmith/Armorer. Cobra Tactical is an FFL-07 and would be happy to assist you in addressing any issues with your firearm.
I ordered the "heavy" carbine buffer which was listed as 4.0 oz. to try and smooth out one f my AR's. I received the buffer in reasonable time and immediately weighed it. the weight was only 3.75 oz. although that is only a quarter ounce it was not the 4.0oz buffer as advertised. The scale was calibrated prior to my weighing the buffer. the same day I emailed Cobra and asked about the problem. I have had no response. In today's business world where customer service is what most buyers have come to expect, to not get any response and to read that I cannot return any "Firearm parts" is very disheartening.
Did you find this helpful?
from San Diego, CA.
Was this answer helpful?
[a_helpful] of [a_votes]
Customer(s) found this Answer helpful.
Answer provided by:
No Answers have been submitted yet.
(Submit an answer)
Recently Viewed Items